Last Modified: 11-29-2007 1.6 A
Service Category: Audio/Visual/Telematics Section: Audio/Video
Model Year: 2008 Model: Sequoia Doc ID: RM00000334N005X
Title: AUDIO / VIDEO: REAR DOOR SPEAKER: REMOVAL (2008 Sequoia)

REMOVAL

HINT:

  • Use the same procedure for the RH side and LH side.
  • The procedures listed below are for the LH side.

1. REMOVE REAR DOOR FRAME GARNISH RH DOOR / HATCH: REAR DOOR: DISASSEMBLY (2008 Sequoia)+

2. REMOVE REAR DOOR INSIDE HANDLE BEZEL PLUG RH DOOR / HATCH: REAR DOOR: DISASSEMBLY (2008 Sequoia)+

3. REMOVE REAR UPPER DOOR ARMREST BASE PANEL RH DOOR / HATCH: REAR DOOR: DISASSEMBLY (2008 Sequoia)+

4. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY RH DOOR / HATCH: REAR DOOR: DISASSEMBLY (2008 Sequoia)+

5. REMOVE REAR NO. 1 SPEAKER ASSEMBLY

(a) Disconnect the speaker connector.

(b) Remove the 3 screws.

(c) Disengage the 2 claws and remove the speaker.

NOTICE:

Do not touch the cone part of the speaker.

6. REMOVE REAR NO. 2 SPEAKER ASSEMBLY (for 14 Speakers)



(a) Disengage the 3 claws and remove the speaker.